AquaScape Three Disc Floating Pond Fogger Manuel d'instructions Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
Congratulations on your purchase of the new Aquascape Floating
Pond Fogger with LED Lights! This UL-approved, three disc fogger is
designed to oat in your pond and create a misty effect over the
water. The fogger is also equipped with an automatic shut-off to
prevent disc damage due to low water level.
Use of this Manual
Please read this instruction manual thoroughly to make sure that you use it properly. This
manual contains important information on first time use, general operation, maintenance
and specific electrical operating specifications. It is recommended that you keep this
manual in a handy location for quick reference, maintenance and troubleshooting in
the future.
Features & Functions
This fogger diffuses water into very small particles creating a “smoke-on-the-water” dry
ice effect without the dry ice chemicals and without the need for any special handling,
safety and health concerns. It generates negative ions. It also helps to increase the
humidity and freshen the air.
Changing LED lights create a comfortable and relaxing atmosphere. The design and
thermatically sealed circuit make sure that it can work normally in the water all the time.
The water-level sensor switch automatically turns the fogger off whenever the water level
drops below the required depth. Once water is added, bringing the water level depth back
to the required level, the fogger will automatically operate and the LED lights will turn on.
The temperature sensor switch automatically turns the fogger off whenever the
temperature is higher than that of normal operation.
• The fogger is supplied with an outdoor transformer.
2
Floating Pond Fogger
with LED Lights
Installation & Maintenance Instructions
1) Getting to Know Your Floating Pond Fogger
1.1 How it Works
The fogger utilizes electrical ultrasound vibrations to produce the mist. The mist contains
a large number of negative ions, which freshens the air and increases the humidity of the
air. The fogger also utilizes multi-colored LED lighting.
The fogger utilizes integrate circuits and an airproof design. This allows the fogger to stay
submerged in water for a longer period of time.
The fogger also has a water-level sensor switch that automatically turns off the unit when
the water level drops; avoiding damage to the ceramic disc. The indicator light on the top
of the fogger will turn on when there are low levels of water.
2) Operating Instructions
Be sure the transformer voltage is the same as your local power supply. If not, don’t
use this device until you have the correct voltage.
2.1 Place the Fogger
Place the floating pond fogger in the
water and submerge it until it is
completely covered by water. If the water
is too shallow the fogger will not turn on.
Place the fogger plug into the outlet of
the receiver.
Tighten tarpaulin.
Plug the transformer into the power supply.
If it is correctly installed, it will work immediately.
3) Safety Precautions
Do not scratch the surface of or place anything on the water level sensor.
Do not move the unit or pull the cable when in use. For the best mist effect, don’t place
anything less than 10 cm above the surface of the fogger, such as cable, containers, etc.
If your finger is above the ceramic disc, the ultrasonic vibrations may hurt you. However,
this is not electric shock.
Place the transformer in a clean place away from any moisture.
Fog Volume (ml/h)
Water Temp.
(ºC)
Ceramic Disc Plating
Lifespan of Disc
(hours)
≥ 900 0
˜
50 Nickel or Titanium
3000
Working Voltage
(VAC)
Working Electric Current
(A)
Ultrasonic
Freq. (MHz)
Ceramic Disc Size
(mm)
36 3.9 1.75 Ø 20
99572 3-Disc Fogger Instructions2 2 6/2/06 2:40:50 PM
Vue de la page 1
1 2 3 4 5 6 7 ... 11 12

Commentaires sur ces manuels

Pas de commentaire